SCDF Regulated Fire Safety Products in Singapore

How the SCDF Product Listing Scheme, Fire Code 2023 Chapter 11 and Table 11A apply to fire-rated systems, building materials and fire safety equipment.

Request FSC02 Assessment Chat with PE Consultants on WhatsApp Email pe@qp.sg

Direct answerRegulated fire safety products are the products and materials listed in SCDF Fire Code 2023 Table 11A. Under the SCDF Product Listing Scheme each must hold a valid CoC from an SAC-accredited Certification Body; some also need a DoC, serial label or certified mark. Products in SCDF’s Annex C list also require FSC02 endorsement by the Appropriate QP.

Last reviewed: 24 September 2026 · Primary reference: SCDF Fire Code 2023, Chapter 11 and Table 11A · Prepared by PE Consultants Pte Ltd

SCDF Product Listing Scheme in brief

Under the Product Listing Scheme, regulated fire safety products are regulated by SCDF and certified by Certification Bodies accredited by the Singapore Accreditation Council. CoCs and DoCs are recorded in each Certification Body’s online directory for verification. SCDF currently recognises ten Certification Bodies, whose directories are linked in the sources below.

Product-specific FSC02 guidance

Fire-rated floor FSC02

Table 11A item 5 — CoC + DoC.

Fire-rated ceiling FSC02

Items 6.1–6.3 — CoC + DoC.

Fire-rated partition FSC02

Items 4.1–4.3 and 7.1–7.3 — CoC + DoC.

Fire stopping and fire-rated collars

Item 11 — CoC + DoC.

Fire-rated duct system FSC02

Item 9 — CoC + DoC.

Intumescent coating FSC02

Item 27 — CoC + DoC.

Composite panels, engineered timber, coldroom, PV

Items 36, 38, 39, 40 — CoC + DoC.

CoC and DoC review

Document review for any Table 11A product.

Table 11A: CoC, DoC, label and FSC02 by product category

Summary prepared by PE Consultants from SCDF Fire Code 2023 Table 11A (last reviewed 24 September 2026). The exact requirement must be checked against the latest SCDF Table 11A and the relevant CoC.
Product category (Table 11A ref.)	CoC required	DoC required	Serial label or certified mark	FSC02 endorsement	Typical QP verification documents
Products generally requiring CoC + DoC
Fire-rated partition — compartment wall, protected shaft 4.1–4.3	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC appendix, DoC, system test report, wall height and framing details, board layers, joints and penetrations, site photos
Fire-rated floor 5	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC and issue number, DoC, system and material test reports, supporting structure, loadbearing capacity, joints, penetrations, site photos
Fire-rated ceiling and ceiling protection 6.1–6.3	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC appendix, DoC, suspension system, board layers, services and light-fitting interfaces, access panels
Fire-rated enclosure / spraying material; protection to steel, firefighting systems and building services 7.1–7.3	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC scope for element type and period, DoC, section sizes, thickness records, enclosure build-up
Smoke barrier 8.2	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, installed extent and fixing details, interface with smoke-control design
Fire-rated duct system 9	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, duct size and orientation limits, hangers, penetration sealing, access doors
Fire-stopping material, including fire-rated collars 11	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC scope (substrate, service type, size, gap), DoC, penetration schedule, photographs of each typical seal
Fire-rated glass block / glass partition 12	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, glass type and thickness, frame, glazing beads, maximum pane size, fixings
Intumescent coating system 27	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, primer and topcoat within system, section factors, DFT schedule and readings
Fire-rated roof covering 35.2	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, roof build-up, substrate and fixing details
Composite panel for external-wall cladding 36	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, project DoC, panel core and build-up, framing and fixing system, cavity barriers
Engineered timber 38	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, product grade and dimensions, fire design basis, connections and protection
Solar PV module — roof-mounted (specified) / wall-mounted or wall-integrated 39.1–39.2	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, module model and wattage range, mounting configuration and location
Coldroom material — non-fire-rated and fire-rated 40.1–40.2	Yes	Yes	DoC is the representation of compliance	Listed in Annex C — Appropriate QP endorsement where applicable	CoC, DoC, panel type and core, thickness, joints, penetrations, fire-rated coldroom configuration
Materials generally requiring CoC + certified mark (no DoC)
Raised floor panel 30	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
Material for wall, ceiling or floor construction 31	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
Thermal insulation material 32	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
Finishing material for wall and ceiling 33	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
Plastic finishing material for floor 34	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
Non-fire-rated roof covering 35.1	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
UPVC window frame 37	Yes	Not generally	Certified mark	Listed in Annex C — confirm applicability to the project use	CoC and appendix, product identification and certified mark, location of use
Products generally requiring CoC + serial label or certified mark (no DoC)
Fire alarm panel 1	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Fire pump 3	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Smoke curtain 8.1	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Kitchen-hood fire extinguishing system 10	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Exit sign 13.1–13.2	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Emergency lighting (self-contained) 14	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Fire hose reel 16	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Fire damper / fire-smoke damper 19.1–19.2	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Fire-rated door 20.1	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Fire shutter / curtain 23	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Portable fire extinguisher 25	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Fire-resistant cable 26	Yes	Not generally	Certified mark	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Landing valve 28	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Breeching inlet 29	Yes	Not generally	Label	Not generally in the Annex C FSC02 product list — verify under the project’s certification requirements	CoC, serial labels / certified mark on each item, installation and commissioning records
Home fire alarm device (smoke detector) 2	Qualified — check Clause 6.3.6 and Table 11A Note 7	Not generally	Per compliance route	Not generally in the Annex C FSC02 product list	Compliance route under Cl. 6.3.6, applicable certification

Fire-rated glass partitions (item 12) require a CoC and DoC; the glass type, thickness, frame and maximum pane size must all fall within the certified scope. Composite panels for external-wall cladding (item 36) are subject to project-level inspection by the Certification Body — the composite panel SCDF compliance article explains the checks.

Whether a particular product needs FSC02 depends on its exact classification, intended use, SCDF Table 11A category and project application. Product numbering in the older Annex C circular may differ from the current Fire Code 2023 Table 11A.

Frequently asked questions

Which SCDF products require FSC02?

SCDF’s Annex C list identifies the regulated products that require endorsement by the Appropriate QP. These are mainly passive fire protection systems and building materials — for example fire-rated partitions, floors and ceilings, fire-rated enclosures, fire-rated duct systems, fire-stopping materials, fire-rated glass partitions, intumescent coatings, composite external-wall panels, engineered timber, coldroom materials and applicable solar PV modules. Whether a particular product needs FSC02 depends on its exact classification, intended use, SCDF Table 11A category and project application. See SCDF regulated fire safety products.

Why do Annex C item numbers not match Table 11A?

The older Annex C circular used its own numbering, which may differ from the current Fire Code 2023 Table 11A. Always identify a product by its description and its current Table 11A reference, not by an old item number.

Is “SCDF-approved product” the correct term?

Usually not. SCDF does not approve or endorse individual CoCs. The accurate description is a regulated fire safety product certified by an SAC-accredited Certification Body under the SCDF Product Listing Scheme, holding a valid CoC. The phrase “SCDF-approved” is often misleading and should not be relied on without checking the CoC.

Who issues a SCDF CoC?

A CoC is issued by a Certification Body accredited by the Singapore Accreditation Council (SAC) and recognised by SCDF, such as those listed on SCDF’s Regulated Fire Safety Products page. SCDF does not issue or endorse the CoC, and PE Consultants does not issue CoCs or DoCs. CoCs are recorded in each Certification Body’s online product directory for verification.

Request FSC02 Assessment

Send your CoC, DoC, product details and installation information to PE Consultants Pte Ltd. FSC02 endorsement is subject to review of the product documentation, certification scope, installation details and the QP’s professional assessment.

Email: pe@qp.sg | WhatsApp: +65 9800 4385

Submit Product Details WhatsApp PE Consultants Send CoC for Review

Official sources

Last reviewed: 24 September 2026. Regulatory references are to the SCDF Code of Practice for Fire Precautions in Buildings 2023 (Fire Code 2023), Chapter 11 and Table 11A.